Security Link SL150 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 69)

15–1

SECTION 15

Data Field Descriptions

••••••••••••••••••••••••••••••••••••••••••••••••••

In This Section

♦

Descriptions of System Data Fields

••••••••••••••••••••••••••••••••••••••••••••••••••

Descriptions of System Data Fields

The blank programming form (in the Programming Guide) should be used to record the data

for this installation. Defaults (where applicable) are indicated in the programming form.

The following pages list all data fields in the SL150 in numerical order. If you have

performed the programming instructions that were included with the installation of each of

the peripheral devices covered in previous sections, this table will simply serve as a reference

for all data fields in the system. If you have decided to program all the data fields in the

system at one time (and have not perform the programming required yet), you can use this

listing to program all the data fields now.

Note: The boxes adjacent to the field descriptions indicate the number of digits that need to

be entered; default values (where applicable) are shown in these boxes.

✱

20 INSTALLER CODE

4 | 1 | 1 | 2

The Installer code is used to enter the 4-digit Master security code in the

normal operation mode, via the keypad. See paragraph titled “Master Code”

Section 23: System Operation

for procedure.

Enter 4 digits, 0–9.

✱

22 RF SYSTEM

0 = no RF receiver used

1 = 5881/5882 RF receiver used

4 = 5881/5882 RF receiver used with RF Jam Detection

installations

Must be “4” (5881/5882 receiver with RF Jam Detection)

✱

23 FORCED BYPASS FUNCTION

0 = no

forced

bypass

1 =

provide

automatic bypass of all open (faulted) zones

All

zones

bypassed by this function will be displayed after the bypass is

initiated. UL

installations

: Must be “0” (no forced bypass)

✱

24 RF HOUSE ID CODE

0 | 0

00 = disable all wireless keypad usage

01-31 =

House

The House ID identifies receivers and wireless keypads.

If a 5827 or 5827BD Wireless Keypad or 5804BD Transmitter is to be used, a

House ID code MUST be entered, and the keypad should be set to the same

ID.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 143 144

Kommentare zu diesen Handbüchern

Keine Kommentare

Security Link SL150 Anleitung zur Fehlerbehebung Seite 69

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Security Link SL150