Security Link SL150 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 119)

Section 23 - System Operation

23–5

Telephone Line Failure

A display of CHECK 94 (on fixed-word keypads) or TELCO FAULT (on alpha keypads)

indicates that a monitored telephone line (if programmed in field

✱

92) has been cut (or

disconnected). Depending on how the system was programmed, the keypad may also produce

a trouble sound, and the external sounder may be activated. Silence by entering Installer

code plus OFF.

Power Failure Displays

• If there is no keypad display at all and the POWER indicator (if present) is not lit,

operating power for the system has been lost and the system is inoperative.

• If the message AC LOSS (on alpha keypads) or NO AC (on fixed-word keypads) is

displayed, and the POWER indicator (if present) is off, the system is operating on battery

power only.

• If the battery standby capacity is used up during a prolonged AC power outage, the

control's auxiliary power will shut down to minimize deep discharge of the battery.

Other Displays (fixed-word displays are in parentheses)

Busy-Standby

(

) If this remains displayed for more than 1 minute, the system is

disabled.

Modem Comm

(

) The system is in communication with the Central Station for change of

function or status verification.

Comm. Failure

(

) A

communication failure

has occurred.

Open-circuit

(

) The keypad is not receiving signals from the control and sees an open-

circuit.

Long Rng Trbl

(

) Backup

LRR communication failure

Bell Failure (CHECK 70)

Bell supervision

failure

RCVR Jam (CHECK 90)

RF jam detected

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 143 144

Kommentare zu diesen Handbüchern

Keine Kommentare

Security Link SL150 Anleitung zur Fehlerbehebung Seite 119

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Security Link SL150