Security Link SL150 Anleitung zur Fehlerbehebung PDF herunterladen (Seite 65)

14–1

SECTION 14

Zone Response Type Definitions

••••••••••••••••••••••••••••••••••••••••••••••••••

In This Section

♦

Zone Type Definitions

••••••••••••••••••••••••••••••••••••••••••••••••••

Zone Type Definitions

You must assign to each zone, a zone type, which defines the way in which the system

responds to faults in that zone. Zone types are defined below.

Type 00

Zone Not Used

Program a zone with this zone type if the zone is not used.

Type 01

Entry/Exit Burglary

This zone type provides Exit and Entry Delays whenever the zone is

faulted if the control panel is armed in the AWAY or STAY mode.

When the panel is armed in the INSTANT or MAXIMUM mode, no

Entry Delay is provided. Entry Delay #1 is programmable from 0-99

seconds (field

✱

35).

Exit Delay begins whenever the control is armed, regardless of the

arming mode selected, and is independently programmable from

0-99 seconds (field

✱

34).

This zone type is usually assigned to sensors or contacts on doors

through which primary entry and exit will take place.

The SL150 will annunciate faster beeps during the last 10 seconds

of the exit delay.

Type 02

Entry/exit Burglary

This zone type provides a secondary Entry Delay whenever the

zone is faulted if the panel is armed in the AWAY or STAY mode.

When the panel is armed in the INSTANT or MAXIMUM mode, no

Entry Delay is provided. Entry Delay #2 is programmable from

0-99 seconds (field

✱

36).

The programmed Exit Delay (field

✱

34) begins whenever the

control is armed, regardless of the arming mode selected.

This zone type is usually assigned to sensors or contacts on doors

through which secondary entry and exit will take place, and where

more time might be needed to get to and from the keypad (typically

used for a garage, loading dock, or basement door).

The SL150 will annunciate faster beeps during the last 10 seconds

of exit delay.

Type 03

Perimeter Burglary

This zone type gives an instant alarm if the zone is faulted when

the panel is armed in the AWAY, STAY, INSTANT, or MAXIMUM

mode. This zone type is usually assigned to all sensors or contacts

on exterior doors and windows.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 143 144

Kommentare zu diesen Handbüchern

Keine Kommentare

Security Link SL150 Anleitung zur Fehlerbehebung Seite 65

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Security Link SL150