Security Link SL150 Betriebsanweisung PDF herunterladen (Seite 32)

- 32 -

Testing the System

(To be conducted weekly)

Using the

TEST

Key

The TEST

key puts your system into a TEST mode, which allows each

protection point to be checked for proper operation. The keypad sounds a single

beep every 40 seconds as a reminder that the system is in this TEST mode.

Note:

An alarm message will not be sent to your alarm monitoring company

during the following tests

✱✱✱

SYSTEM READY

✱✱✱

Disarm the system.

Disarm the system and close all protected

windows, doors, etc. The SYSTEM READY

message should be displayed and the green

READY indicator should also be lit.

TEST

(Security Code)

Enter 4-digit security code, then press

the TEST key.

Example: Press 7

2 9 6 then

TEST

Listen.

The external sounder should sound for 2

seconds and then turn off. If the sounder does

not sound,

CALL FOR SERVICE AT ONCE.

Fault zones.

Open each protected door and window in turn

and listen for three beeps from the keypad.

Identification of each faulted protection point

should appear on the display. The display will

clear when the door or window is closed.

Walk in front of any interior motion detectors

(if used) and listen for three beeps.

The keypad should display the identification of

the activated detector.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Security Link SL150 Betriebsanweisung Seite 32

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Security Link SL150