Security Link SL150 Betriebsanweisung PDF herunterladen (Seite 20)

- 20 -

Disarming and Silencing Alarms (cont'd)

To clear the display after silencing an alarm:

ALARM 03 BACK

DOOR

Listen for 1 beep.

The keypad displays the alarm memory.

Enter 4-digit security code, then press

the OFF key.

Example: Press 7

2 9 6 then 1

OFF

✱✱✱

SYSTEM READY

✱✱✱

Listen for 1 beep.

The keypad displays the SYSTEM

message and beeps once to confirm that the

system is disarmed.

Memory of Alarm

If an alarm occurs, the keypad displays the zone number(s) that caused the

alarm and the type of alarm. These messages remain displayed until cleared by

a user.

To clear the display:

Note the zone number displayed and enter an OFF sequence.

OFF

(Security Code)

Enter 4-digit security code, then press

the OFF key.*

Example: Press 7

2 9 6 then 1

OFF

If the SYSTEM READY message will not display, go to the displayed zone and

correct the fault (close windows, etc.). If the fault cannot be corrected, notify

your alarm company.

In cases of an alarm, trouble, or

CHECK

message, the 4-digit security code

and OFF key must be entered into the system

two times

to clear the display.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Keine Kommentare

Security Link SL150 Betriebsanweisung Seite 20