Security Link SL150 Betriebsanweisung PDF herunterladen (Seite 21)

- 21 -

Bypassing Protection Zones

Using the

BYPASS

Key

This key is used when you want to arm your system with one or more zones

intentionally unprotected. Bypassed zones are unprotected and will not cause

an alarm when violated while your system is armed.

All bypasses are

removed when an OFF sequence (security code plus OFF) is

performed

. Bypasses are also removed if the arming procedure that follows

the bypass command is not successful.

The system will not allow fire zones to be bypassed.

To bypass zones, the system must be disarmed first.

BYPASS

(Security Code)

Enter 4-digit security code, then press the

BYPASS key.

Example: Press 7

2 9 6 then

BYPASS

(Zone Numbers)

Enter zone numbers.

Enter the zone number(s) for the zones to be

bypassed (e.g., 01, 02, 03, etc.).

Important!

All single-digit numbers must be

preceded by a zero (for example, enter 01 for

zone 1).

BYPASS 07 FRONT

UPSTAIRS BEDROOM

Typical bypass message

Wait.

The keypad displays the word

BYPASS

along

with each bypassed zone number (and a zone

descriptor if programmed). Wait for these

zones to be displayed, to be sure that intended

zones are bypassed.

✱

ZONE BYPASSED

✱

SYSTEM READY

Arm as usual.

Arm the system as usual when the keypad

displays the SYSTEM READY

message.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 59 60

Kommentare zu diesen Handbüchern

Keine Kommentare

Security Link SL150 Betriebsanweisung Seite 21

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Security Link SL150